Yaskawa Ladder Works Programming Manual Uživatelský manuál stáhnout pdf (Strana 191)

9.7 Send Message Function (MSG-SND)

9-16

9.7.1 Parameters

They adhere to contents-functions and so on and are collected into parameter numerical order.

Table 9.6 is Parameter List.

Table 9.6 Parameter List

Contents

Parameter No. IN/OUT

MEMOBUS Non-procedural

PARAM 00 OUT Process result Process result

PARAM 01 OUT Status Status

PARAM 02 IN Called station # Called station #

PARAM 03 SYS System reserved System reserved

PARAM 04 IN Function code

PARAM 05 IN Data address Data address

PARAM 06 IN Data size Data size

PARAM 07 IN Called CPU# Called CPU#

PARAM 08 IN Coil offset

PARAM 09 IN Input relay offset

PARAM 10 IN Input register offset

PARAM 11 IN Holding register offset Register offset

PARAM 12 SYS For system use For system use

PARAM 13 SYS System reserved System reserved

PARAM 14 SYS System reserved System reserved

PARAM 15 SYS System reserved System reserved

PARAM 16 SYS System reserved System reserved

■ Process Result (PARAM00)

The process result is output to the upper byte. The lower byte is for system analysis.

• 00xx : In process (BUSY)

• 10xx : End of process (COMPLETE)

• 8xxx : Occurrence of error (ERROR)

Error Classification

• 81xx : Function code error

The sending of an unused function code was attempted. Or, an unused function code was

received.

• 82xx : Address setting error

The data address, coil offset, input relay offset, input register offset, or holding register

offset setting is out of range.

•

83xx : Data size error

The size of the sent or received data is out of range.

• 84xx : Line No. setting error

The line No. setting is out of range.

• 85xx : Channel No. Setting error

The channel No. setting error.

• 86xx : Station address error

The station No. setting is out of range.

• 88xx : Transmission unit error

An error response was returned from the transmission unit.

•

89xx : Device selection error

A non-applicable device is selected.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 219 220

Komentáře k této Příručce

Žádné komentáře

Yaskawa Ladder Works Programming Manual Uživatelský manuál Strana 191

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Yaskawa Ladder Works Programming Manual