Yaskawa VS-616G5 Series Revision F Programming Manual Uživatelský manuál stáhnout pdf (Strana 35)

VS-616G5 Programming Manual 35

V/f V/f w/PG

Open Loop

Vector

Flux

Vector

Parameter C3-05 determines if the motor torque characteristic is based on output frequency or motor

speed.

When running the motor only in the constant torque region, leave parameter C3-05 set to 0 for the

best performance.

When running the motor in the constant horsepower region, set parameter C3-05 to 1 because the

larger flux will result in better motor stability.

C3-04 Slip Compensation During Regeneration Slip Comp Regen

A - A -

Setting Description

0 Slip compensation disabled during regeneration (factory default)

1 Slip compensation enabled during regeneration

C3-05 Flux Calculation Method Flux Select

- - A -

Setting Description

0 Slip Included

Motor torque characteristic is based on frequency. (factory default)

1 Slip Excluded

Motor torque characteristic is based on motor speed.

60Hz 1800 rpm 120Hz 3600 rpm

=1=0

Torque

100%

Section C: Tuning Parameters

C3 Motor Slip Compensation

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 161 162

Žádné komentáře

Yaskawa VS-616G5 Series Revision F Programming Manual Uživatelský manuál Strana 35